News, Industry News

What are the factors that cause the seal of the can sealing machine to be damaged?


The can sealing machine is composed of a motor, a pulle […]

The can sealing machine is composed of a motor, a pulley, a main shaft, a lock pad, a column, a lifting table, a right roller, a camshaft and a cam, a gearbox, a gear rack, etc. The material leaks from the rear end of the material tank of the automatic can sealing machine. Check whether the sealing ring on the piston of the paste filling machine is damaged. If it is damaged, please replace it. Confirm that the piston and piston rod are tight. Can the piston be in the center of the aluminum bracket of the cylinder.
Clean the dust and dirt in the pump cavity of the vacuum pump once every six months, and clean the fan hood, fan wheel, grille and cooling fins (clean with compressed air). Change the exhaust filter once a year, clean or replace the intake filter (clean with compressed air). Change the vacuum pump oil and oil filter every 500-2000 hours.


Oral liquid, easy-folding plastic bottles and other automatic can sealing machines, and can sealing equipment for can sealing machines need to carry out reverse directional filling of plastic bottles, and then send them to the conveying track for filling and sealing between the bottle body and the bottom cover. combine. Because too much liquid medicine remains in the sealing place, it will seriously affect the sealing quality or cause leakage. In order to ensure the sealing quality, the automatic can sealing machine needs to make the liquid medicine filling head rise synchronously with the filling level. A piston is driven by the cylinder to extract and eject the material. The one-way valve is used to control the flow of the material, and the reed switch is used to control the stroke of the cylinder to adjust the filling volume.


Factors that cause the damage to the lid of the can sealer
The can sealer and automatic can sealer generally cause damage to the can seal under the following conditions:
Tank chain mode and dial are out of sync.
The dial and holder can be on the wrong table and the gland's wheel pot.
The turntable of the pan lid did not land exactly on the lid of the jar.
The gap between the lid sliding ends is too small (JAR catches up to the top position), the gap between the lid boxes must be 1mm.
Height does not adjust.
After understanding the general situation of can sealing machine and automatic sealing machine causing damage to the lid of the can, we can better control the damage of the lid of the can.

Views: 42