News, Industry News

Analysis of the reasons for the seaming machine hemming!


In the process of pressure tank operation, it will have […]

In the process of pressure tank operation, it will have various problems. In this article, we will talk about the reasons for the problems, hoping to avoid them in the future operation process and improve production efficiency.
Many times when sealing the can, there may be curling. In fact, this situation is likely to be caused by improper adjustment. If the curling roller is too loose, curling will occur, and vice versa. Too tight is not good either. Another situation may be that because the round edge of the can lid is not good, there will be curling during the operation.
Many private small workshops may not have very strict production requirements. The operators may not use special machines in order to save trouble during operation, but find a nearby machine for sealing processing. In fact, this is not good. If the machine is not suitable for sealing, the height of the can may also be different, which will lead to a curled edge.

Views: 183